WEINIG Hydro-Cutterhead 4 pocket, comes in 12° and 20° cutting angles. Standard bore size is 1 13/16" and 2 1/8" diameter. We recommend Alvania #3 grease. See cutterhead accessories section for replacement items.

WISCONSIN HYDRO-LOC™ cutterheads are manufactured from premium steel. They are available in 1-13/16" and 2-1/8" bore size. Standard cutting angle is 12° and 20° for selected hardwoods which present tearout problems. Standard corrugated knife slots are 16-60° with 16-90°.

WEINIG Hydro-Cutterhead 6 and 8 pocket, comes in 12° and 20° cutting angles. Standard bore size is 1 13/16" and 2 1/8" diameter. We recommend Alvania #3 grease. See cutterhead accessories section for replacement items.

WISCONSIN HYDRO-LOC™ cutterheads are manufactured from premium steel. They are available in 1-13/16" and 2-1/8" bore size. Standard cutting angle is 12° and 20° for selected hardwoods which present tearout problems. Standard corrugated knife slots are 16-60° with 16-90°.

Manufactured for non-jointed moulders these cutterheads are available in straight bore 1 1/2", 1 13/16" and 2 1/8" diameter and standard in 20°, or 12° cutting angle. Competitively priced for off the shelf delivery. See cutterhead accessories section for replacement items.

Manufactured for non-jointed moulders these cutterheads are available in straight bore 1 1/2", 1 13/16" and 2 1/8" diameter and 20° (softwoods) and 12° (hardwoods) cutting angles. Competitively priced for off the shelf delivery. See cutterhead accessories section for replacement items.

WISCONSIN cutterheads are manufactured from a premium hardened steel body. Precision machined for true concentricity. WKW cutterheads come standard in 20° or 12° cutting angles.

~Ask about our quantity discounts and free freight on 10 or more cutterheads.

~Please allow two weeks delivery.

WISCONSIN cutterheads are manufactured from a premium hardened steel body. Precision machined for true concentricity.WKW cutterheads come standard in 20° or 12° degree cutting angles.

TERMINUS Rabbeting/rebating reference engravers are for moulder applications in conjunction with the 9000 Series cutterheads.When production requires straightening or use of thin or twisted stock, the reference engraver guides the piece over the first bottom and up to the right spindle

TERMINUS hogging and finishing cutterheads lower tooling cost per board foot produced. Due to the constant cutting circle (=/- .001"), there is no knife adjustments. The insert knives are available in H.S.S. with 18% Tungsten or also Solid Carbide.The knives change radially which allow easier access for knife changing.

The CombiHead combines the versatility and cost effectiveness of movable insert profile knives in the same cutterhead with reversible carbide planer knives. Each CombiHead includes a pair of carbide planer knives. Grinders are no longer required to produce S4S material with a radius or bevel corners, small grooves, backside relief cuts on flooring products.

Weinig Profile Insert Tooling System for woodworkers that require an economic solution for the production of small precision profiles.The tool bodies come in both 2 and 3 knives and 1 1/2" or 1 13/16" bore sizes. Tongue-and Groove carbide insert profile knives and backer are in stock FOB Mooresville, NC.

Custom Carbide Profile knives and backers are also available, please allow two delivery on custom knives.

ASAP stocks a complete line of accessories for Weinig cutterhead including, Gibs, Gib screws, safety collars, precision machnist suare, grease zirts, grease release valves, #3 hydro-clamping grease and hydro-grease gun.

WEINIG Dual Angle Cutterheads - One cutterhead does both hardwoods and softwoods by offering 12° & 20° cutting angles. These two in one cutterheads are available in straight bore, 1 1/2" And 1 13/16" bore diameter. See cutterhead accessories section for replacement items.

Weinig Centerlock 530 Cutterheads comes in both 2 and 4 pockets. Each cutterhead comes equipped with one set of HSS knives. These replaceable reversible knives are exculsively designed for the Centrolock cutterheads and are available in HSS and carbide

Weinig Spiral Cutterheads reduces noise, cutting pressures and tearing. These cutterheads are designed for non-jointed applications of 80 FPM or less.

This tooling is exclusvely for use on Weinig U2000 and U3000 profile centers.Designed for Weing's Axial Constant Set-up System. Contact the sales department for more details on this state-of-the-art tooling.

Weinig Powermat Spiral Planerheads are similar in design to Weinig standard spiral planerhead, but with an integrated HSK shank. For exculsive use on all Weinig Powermat moulders. Each cutterhead includes a full set of installed inserts.

Powerlock insert planing cutterheads feature a full-length reversible knife in both HSS and Carbide,but with an integrated HSK shank. For exclusive use on all Weinig Powermat moulders.

Wisconsin Knife Works Straight bore shaper cutterheads are available in three bore sizes.Premium hardened steel bodies and various configurations available.